PRODUCTS

Product introduction: This product is made of fluorocarbon resin, high-quality DuPont inorganic pigments, reflective heat-insulating materials, BYK and other excellent additives, and is combined with Bayer curing agent to form a film. It is a two-component reactive coating. It can effectively prevent the damage of the base surface by the atmosphere and ultraviolet rays, and prolong the service life of the coated object. It is the best protective decorative coating for buildings from aging damage caused by climate change. Coatings are divided into two types: solvent-based and water-based. Water-based is mainly water-based emulsion. Compared with solvent-based, its weather resistance, water resistance, and stain resistance are weaker, but the reflective heat insulation function is consistent with solvent-based coatings, and the smell is friendly. The construction process is more environmentally friendly.

Application: It is suitable for exterior wall coating of buildings such as residences, hotels, office buildings, schools, and stadiums.

Features     : A highly functional coating with an infrared reflectivity as high as 86%, and a very obvious heat insulation and cooling effect.

Construction method: deployment in strict proportion. First mix the curing agent and the paint thoroughly and cure for 15 minutes, then add the thinner. In the production process of this product, special consideration is given to the construction requirements, so it can be painted by brush, spray or roller. This product is a two-component reactive coating, which should be used within 4 hours after mixing.

Drying time: temperature 25 ℃, surface dry 30 minutes, hard dry 24 hours. Fully cured for 5-7 days.

Coating interval: more than 4 hours.

Storage: Cap tightly sealed. Store in a cool, clean, dry place. The shelf life is 2 years.

Surface treatment: 

(1) The unevenness of the base surface is less than 2 mm, without cracks and pores.

(2) The moisture content of the cement base surface is less than 10%, and the pH value is less than 10.

(3) The base material is solid, without hollowing, cracking, oil, dust, and efflorescence.

Construction conditions: The humidity during construction is less than 75%, and the construction temperature is 5°C-40°C. Construction is strictly prohibited in rainy, snowy and foggy weather.

Safety and Precautions: Ensure that the construction site has good ventilation. Keep away from open flames, no smoking at the construction site, and avoid splashing paint on eyes and skin.

Supporting primer: special primer for building exterior walls